Tractor PTO Connect Adapter
The PTO Connect comes in the standard 1 3/8” 6 splines (540 RPM) to fit most implements and tractors. The adapter contains two connectors, one connector for the tractor and another for the implement. The system prevents the need to twist the PTO shaft to lineup the splines when attaching the PTO implements. This task is accomplished by removing the horizontal splines from the coupler and the output shaft and placing them on the face of the adapters. The splines on the tractor adapter are on a separate plate that will rotate in the left or right direction to line-up with the splines on the implement adapter.
To connect the adapters, all the operator needs to do is slide the tractor and implement connectors together then rotate the inner plate in the left or right direction to line-up with the splines on the implement adapter. Our customers choose this system based on its capability to save operators time while switching between implements, increasing productivity, and reducing back injuries.